Pipeline: pipeline
defination
Agent: mention
jenkins label/agent run
Tools: usage of
existing jenkins tools from manage jenkins
While the syntax for
defining a Pipeline, either in the web UI or with a Jenkinsfile, is the same,
it’s generally considered best practice to define the Pipeline in a Jenkinsfile
and check that in to source control.
Jenkinsfile (Declarative Pipeline):
pipeline {
agent any
stages {
stage('Build') {
steps {
sh 'make'
}
}
stage('Test'){
steps {
sh 'make check'
junit 'reports/**/*.xml'
}
}
stage('Deploy') {
steps {
sh 'make publish'
}
}
}
}
Pipeline Terms:
Step: A single task; fundamentally steps tell
Jenkins what to do. For example, to execute the shell command make use the sh
step: sh 'make'. When a plugin extends the Pipeline DSL, that typically means
the plugin has implemented a new step.
Declarative
Pipeline:
All valid
Declarative Pipelines must be enclosed within a pipeline block, for example:
pipeline {
/* insert Declarative Pipeline here */
}
The basic statements
and expressions which are valid in Declarative Pipeline follow the same rules
as Groovy’s syntax with the following exceptions:
- The top-level of the Pipeline must be a block, specifically: pipeline { }
- No semicolons as statement separators. Each statement has to be on its own line
- Blocks must only consist of Sections, Directives, Steps, or assignment statements.
- A property reference statement is treated as no-argument method invocation. So for example, input is treated as input()
Sections:
agent
The agent section
specifies where the entire Pipeline, or a specific stage, will execute in the
Jenkins environment depending on where the agent section is placed. The section must be defined at
the top-level inside the pipeline block,
but stage-level usage is optional
Parameters
In order to support the wide variety of use-cases Pipeline
authors may have, the agent section
supports a few different types of parameters. These parameters can be applied
at the top-level of the pipeline block,
or within each stage directive.
any
Execute the Pipeline, or stage, on any
available agent. For example: agent any
none
When applied at the top-level of
the pipeline block no global agent will be
allocated for the entire Pipeline run and each stage section will need to contain its own agent section. For example: agent none
label
Execute the Pipeline, or stage, on an
agent available in the Jenkins environment with the provided label. For
example: agent { label 'my-defined-label' }
node
agent { node { label
'labelName' } } behaves
the same as agent { label 'labelName' }, but node allows
for additional options (such as customWorkspace).
Docker
Execute the Pipeline, or stage, with the given
container which will be dynamically provisioned on a node pre-configured to accept Docker-based Pipelines, or on
a node matching the optionally defined label parameter. docker also optionally
accepts an argsparameter which may contain arguments to pass directly to a docker run invocation, and
an alwaysPull option, which
will force a docker pull even if the image name is already present. For
example: agent { docker 'maven:3-alpine' } or
agent {
docker {
image 'maven:3-alpine'
label 'my-defined-label'
args '-v /tmp:/tmp'
}
}
docker {
image 'maven:3-alpine'
label 'my-defined-label'
args '-v /tmp:/tmp'
}
}
dockerfile
Execute the Pipeline, or stage, with a
container built from a Dockerfile contained in the source repository.
In order to use this option, the Jenkinsfile must be loaded
from either a Multibranch Pipeline, or a "Pipeline from SCM."
Conventionally this is the Dockerfile in the root of
the source repository: agent { dockerfile true }.
If building a Dockerfile in another
directory, use the dir option: agent { dockerfile { dir 'someSubDir' } }.
You can pass additional arguments to the docker build ...command with the additionalBuildArgs option,
like agent
{ dockerfile { additionalBuildArgs '--build-arg foo=bar' } }
Customworkspac:
agent {
node {
label 'my-defined-label'
customWorkspace '/some/other/path'
}
}
node {
label 'my-defined-label'
customWorkspace '/some/other/path'
}
}
reuseNode:
A boolean, false by
default. If true, run the container on the node specified at the top-level of
the Pipeline, in the same workspace, rather than on a new node entirely
This option is valid for docker and dockerfile, and only has an effect when used on an agent for an individual stage.
Example
Jenkinsfile (Declarative Pipeline)
pipeline {
agent { docker 'maven:3-alpine' }
stages {
stage('Example Build') {
steps {
sh 'mvn -B clean verify'
}
}
}
}
agent { docker 'maven:3-alpine' }
stages {
stage('Example Build') {
steps {
sh 'mvn -B clean verify'
}
}
}
}
Execute
all the steps defined in this Pipeline within a newly created container of the
given name and tag (maven:3-alpine)
Stage-level agent section:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent none
stages {
stage('Example Build') {
agent { docker 'maven:3-alpine' }
steps {
echo 'Hello, Maven'
sh 'mvn --version'
}
}
stage('Example Test') {
agent { docker 'openjdk:8-jre' }
steps {
echo 'Hello, JDK'
sh 'java -version'
}
}
}
}
agent none
stages {
stage('Example Build') {
agent { docker 'maven:3-alpine' }
steps {
echo 'Hello, Maven'
sh 'mvn --version'
}
}
stage('Example Test') {
agent { docker 'openjdk:8-jre' }
steps {
echo 'Hello, JDK'
sh 'java -version'
}
}
}
}
- Defining agent none at the top-level of the Pipeline ensures that an Executor will not be assigned unnecessarily.
- Using agent none also forces each stage section contain its own agent section.
- Execute the steps in this stage in a newly created container using this image.
- Execute the steps in this stage in a newly created container using a different image from the previous stage.
Post:
The post section defines actions which will be run at the
end of the Pipeline run or stage. A number of post-condition blocks are supported within the post section: always, changed, failure, success, unstable, and aborted.
These blocks allow for the execution of steps at the end of the Pipeline run or
stage, depending on the status of the Pipeline.
Conditions:
always
Run regardless of the completion status of the Pipeline run.
changed
Only run if the current Pipeline run has a different status from
the previously completed Pipeline.
failure
Only run if the current Pipeline has a "failed"
status, typically denoted in the web UI with a red indication.
success
Only run if the current Pipeline has a "success"
status, typically denoted in the web UI with a blue or green indication.
unstable
Only run if the current Pipeline has an "unstable"
status, usually caused by test failures, code violations, etc. Typically
denoted in the web UI with a yellow indication.
aborted
Only run if the current Pipeline has an "aborted"
status, usually due to the Pipeline being manually aborted. Typically denoted
in the web UI with a gray indication
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
post {
always {
echo 'I will always say Hello again!'
}
}
}
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
post {
always {
echo 'I will always say Hello again!'
}
}
}
Stages:
Containing a sequence of one or more stage directives, the stages section is where the bulk of the "work"
described by a Pipeline will be located. At a minimum it is recommended
that stages contain at least one stage directive for each discrete part of the continuous
delivery process, such as Build, Test, and Deploy.
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
Steps:
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
Directives
Environment:
The environment directive
specifies a sequence of key-value pairs which will be defined as environment
variables for the all steps, or stage-specific steps, depending on where
the environment directive is located within the
Pipeline.
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
environment {
CC = 'clang'
}
stages {
stage('Example') {
environment {
AN_ACCESS_KEY = credentials('my-prefined-secret-text')
}
steps {
sh 'printenv'
}
}
}
}
agent any
environment {
CC = 'clang'
}
stages {
stage('Example') {
environment {
AN_ACCESS_KEY = credentials('my-prefined-secret-text')
}
steps {
sh 'printenv'
}
}
}
}
- An environment directive used in the top-level pipeline block will apply to all steps within the Pipeline.
- An environment directive defined within a stage will only apply the given environment variables to steps within the stage.
- The environment block has a helper method credentials() defined which can be used to access pre-defined Credentials by their identifier in the Jenkins environment.
Options:
The options directive allows configuring Pipeline-specific
options from within the Pipeline itself. Pipeline provides a number of these
options, such as buildDiscarder, but
they may also be provided by plugins, such as timestamps
Available Options:
buildDiscarder
Persist artifacts and console output for
the specific number of recent Pipeline runs. For example: options {
buildDiscarder(logRotator(numToKeepStr: '1')) }
disableConcurrentBuilds
Disallow concurrent executions of the
Pipeline. Can be useful for preventing simultaneous accesses to shared
resources, etc. For example: options { disableConcurrentBuilds() }
overrideIndexTriggers
Allows overriding default treatment of
branch indexing triggers. If branch indexing triggers are disabled at the
multibranch or organization label, options { overrideIndexTriggers(true) } will enable them for this job
only. Otherwise, options { overrideIndexTriggers(false) } will disable branch indexing
triggers for this job only.
skipDefaultCheckout
Skip checking out code from source
control by default in the agent directive.
For example: options { skipDefaultCheckout() }
skipStagesAfterUnstable
Skip stages once the build status has
gone to UNSTABLE. For example: options { skipStagesAfterUnstable() }
timeout
Set a timeout period for the Pipeline
run, after which Jenkins should abort the Pipeline. For example: options {
timeout(time: 1, unit: 'HOURS') }
retry
On failure, retry the entire Pipeline
the specified number of times. For example: options { retry(3) }
timestamps
Prepend all console output generated by
the Pipeline run with the time at which the line was emitted. For
example: options { timestamps() }
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
options {
timeout(time: 1, unit: 'HOURS')
}
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
agent any
options {
timeout(time: 1, unit: 'HOURS')
}
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
Specifying a global
execution timeout of one hour, after which Jenkins will abort the Pipeline run.
Parameters:
The parameters directive
provides a list of parameters which a user should provide when triggering the
Pipeline. The values for these user-specified parameters are made available to
Pipeline steps via the params object,
see the Example for its specific usage.
Available Parameters:
- string
A parameter of a string type, for
example: parameters { string(name: 'DEPLOY_ENV', defaultValue: 'staging',
description: '') }
- booleanParam
A boolean parameter, for example: parameters {
booleanParam(name: 'DEBUG_BUILD', defaultValue: true, description: '') }
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
parameters {
string(name: 'PERSON', defaultValue: 'Mr Jenkins', description: 'Who should I say hello to?')
}
stages {
stage('Example') {
steps {
echo "Hello ${params.PERSON}"
}
}
}
}
agent any
parameters {
string(name: 'PERSON', defaultValue: 'Mr Jenkins', description: 'Who should I say hello to?')
}
stages {
stage('Example') {
steps {
echo "Hello ${params.PERSON}"
}
}
}
}
Triggers:
The triggers directive
defines the automated ways in which the Pipeline should be re-triggered. For
Pipelines which are integrated with a source such as GitHub or BitBucket, triggers may not be necessary as
webhooks-based integration will likely already be present. Currently the only
two available triggers are cron and pollSCM.
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
triggers {
cron('H 4/* 0 0 1-5')
}
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
agent any
triggers {
cron('H 4/* 0 0 1-5')
}
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
Stage:
The stage directive
goes in the stages section
and should contain a steps section, an optional agent section, or other stage-specific directives.
Practically speaking, all of the real work done by a Pipeline will be wrapped
in one or more stage directives.
Example:
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
agent any
stages {
stage('Example') {
steps {
echo 'Hello World'
}
}
}
}
Tools:
A section defining tools to auto-install and put on the PATH. This is ignored if agent none is specified.
Supported
Tools
maven
jdk
gradle
Example
Jenkinsfile (Declarative Pipeline)
pipeline {
agent any
tools {
maven 'apache-maven-3.0.1'
}
stages {
stage('Example') {
steps {
sh 'mvn --version'
}
}
}
}
agent any
tools {
maven 'apache-maven-3.0.1'
}
stages {
stage('Example') {
steps {
sh 'mvn --version'
}
}
}
}
No comments:
Post a Comment